Research Reports

  1. Rasheed, H. A., “Behavior and Strength of Composite Tubes Considering Delaminations and Other Defects,” Offshore Technology Research Center, Austin (Texas) 1996.
  2. Rasheed, H. A., “Buckling of Anisotropic Composite Cylindrical Shells under External Pressure,” Research Initiation Report, Grant#991064, Society of Manufacturing Engineers, September 2000, 75pp.
  3. Rasheed, H. A. and Perviaz, S. “Nonlinear Finite Element Analysis of Reinforced Concrete Bridge Elements Retrofitted by Advanced Composites,” Bradley University, Hueser Research Report, Dec. 2000, 131p.
  4. Rasheed, H. A. and Perviaz, S. “Effects of FRP Bond-Slip on the Response and Design of Strengthened Reinforced Concrete Bridge Beams,” Bradley University, Hueser Research Report, Dec. 2000, 64p.
  5. Reed, C. E., Peterman, R. J., and Rasheed, H. A. (2005) “Evaluating FRP Repair Method for Cracked Prestressed Concrete Bridge Members Subjected to Repeated Loadings (Phase 1),” KTRAN Report No K-TRAN: KSU-01-02, Kansas Department of Transportation, April 2005.
  6. Charkas, H., Rasheed, H. A. and Najjar, Y. M. “SGER: Neural Networked Finite Element Methodology for Health Monitored Structural Systems,” NSF Final Report, National Science Foundation, submitted in July 2005, accepted in Sept. 2005.
  7. Larson, K. H., Rasheed, H. A. and Peterman, R. J., “Evaluating FRP Repair Method for Cracked Prestressed Concrete Bridge Members Subjected to Repeated Loadings (Phase 2),” KTRAN Report No K-TRAN: KSU-02-03, Kansas Department of Transportation, November 2006.
  8. Abd El-Fattah, A. M., Rasheed, H. A. and Esmaeily, A., “Interactive Software for Design, Actual Ultimate Capacity and Health Monitoring of Confined Circular Columns,” KTRAN Report No K-TRAN: KSU-07-21, Kansas Department of Transportation, August 2009.
  9. Halim, A. H., Rasheed, H. A. and Esmaeily, A., “Software for AASHTO LRFD Combined Shear and Torsion Computations Using Modified Compression Field Theory and 3D-Truss Analogy,” KTRAN Report No K-TRAN: KSU-08-05, Kansas Department of Transportation, July 2011.
  10. Abd El Fattah, A. M., Rasheed, H. A. and Esmaeily, A. “LRFD software for design and actual ultimate capacity of confined rectangular columns: Phase 1 & 2,” KTRAN projects KSU-10-06 and KSU-11-03, Kansas Department of Transportation, July 2012.
  11. Albahttiti, M. T., Rasheed, H. A., Peric, D. and Davis, L. “EAGER: Engineered Bio-composites for Sustainable Concrete,” NSF Final Report, National Science Foundation, submitted in August 2012, approved in August 2012.
  12. Al-Rahmani, A. H., and Rasheed, H. A., “FRP Confinement of Square and Slightly Rectangular Concrete Columns Originally Confined with Steel Ties,” KTRAN Report No K-TRAN: KSU-13-07, Kansas Department of Transportation, Final Report, February 2015.
  13. Abouelleil, A. M. and Rasheed, H. A., “KDOT Column Expert: Ultimate Shear Capacity of Circular Columns using the Modified Compression Field Theory,” KTRAN Report No K-TRAN: KSU-14-04, Kansas Department of Transportation, Final Report, September 2015.
  14. Bernica, A. and Rasheed, H. A. “Rational Load Rating Of Deck-Girder Bridges With Girder End Shear Cracks In Reverse Orientation,” KTRAN Report No K-TRAN: KSU-15-02, Kansas Department of Transportation, Final Research Report, Dec. 2016.
  15. Eric Fletcher, Alaaeldin Abouelleil, and Hayder Rasheed, “FE-ANN Based Modeling of 3D Simple Reinforced Concrete Girders for Objective Structural Health Evaluation,” Institute for Transportation, Iowa State University, Final Research Report, June 2017, Sponsored by Kansas Department of Transportation, Midwest Transportation Center, and U.S. Department of Transportation Office of the Assistant Secretary for Research and Technology.
  16. Zaki, M. A. and Rasheed, H. A., “Superior Anchorage Techniques for Achieving Sectional Flexural Capacity in Reinforced Concrete Beams Strengthened with FRP,” Final Research Report 1, Structural Technologies Inc., July 2018.
  17. Zaki, M. A. and Rasheed, H. A., “Impact of Efficiency and Practicality of CFRP Anchor Installation Techniques on the Performance of RC Beams Strengthened with CFRP Sheets,” Final Research Report 3, Structural Technologies Inc., Sept 2018.
  18. Abouelleil, A. and Rasheed, H. A. “KDOT Column Expert: Shear Capacity of Circular Bridge Piers Confined with FRP Wrapping,” KTRAN Report No K-TRAN: KSU-18-01, Kansas Department of Transportation, Final Research Report, Nov. 2018.
  19. Alshareef, H. A., Rasheed, H. A., Abouelleil, A. and Al-Masri, R. A. “Initial Analytical Investigation of Overhead Sign Trusses with Respect to Remaining Fatigue Life and Predictive Methods for Inspection,” KTRAN Report No K-TRAN: KSU-17-04, Kansas Department of Transportation, Final Research Report, Dec. 2018.
  20. Zaki, M. A. and Rasheed, H. A., “Superior Performance of CFRP-Strengthened Concrete Beams Fastened with Distributed CFRP Spike Anchors,” Final Research Report 3, Structural Technologies Inc., Dec. 2018.
  21. Zaki, M. A. and Rasheed, H. A., “Performance of Reinforced Concrete T Beams Strengthened with Flexural CFRP Sheets and Secured Using CFRP Anchors,” Final Research Report 4, Structural Technologies Inc., Dec. 2018.
  22. Zaki, M. A. and Rasheed, H. A., “Characterization of Debonding Strain in Lightweight Concrete Flexural T Beams Strengthened with FRP Sheets,” Final Research Report, Structural Technologies Inc., June 2019.
  23. Rasheed, H. A., Foerster, A. S., Zaki, M. A. and Raheem, M. M. “New Carbon Fiber Anchor to Secure CFRP Flexural Strengthening Sheets,” Final Research Report, Structural Technologies Inc., Sept. 2019.
  24. Rasheed, H. A., Foerster, A. S., and Raheem, M. M. “New Carbon Fiber Anchor to Secure CFRP Flexural Strengthening Sheets,” KTRAN Report No K-TRAN: KSU-19-03, Kansas Department of Transportation, Final Research Report, Dec. 2019.
  25. Zaki, M. A. and Rasheed, H. A. “Strengthening Sand-Lightweight Concrete with CFRP,” Final Research Report KSU-21-1, Structural Technologies Inc., Feb. 2021.
  26. Al Shboul, K. W., Rasheed, H. A. and Raheem, M. M. “Strengthening All-Lightweight Concrete with CFRP,” Final Research Report KSU-21-2, Structural Technologies Inc., Feb. 2021.
  27. Al Shboul, K. W., and Rasheed, H. A. “Probabilistic Wind Speed Model for Local Data in All Kansas Counties,” KTRAN Report No K-TRAN: KSU-21-06, Kansas Department of Transportation, Final Research Report, Nov. 2021.
  28. Klugh, I., Jones, C., A., and Rasheed, H. A. “Computationally Informed Methodologies for Capturing the Effect of Intervening Structures During Truck Impact Events: Phase I,” KTRAN Report No K-TRAN: KSU-20-05, Kansas Department of Transportation, Draft Final Research Report, May 2021.
  29. Al Shboul, K. W., and Rasheed, H. A. “Initial Analytical Investigation of Cantilever and Butterfly Steel Overhead Sign Trusses with Respect to Remaining Fatigue Life,” KTRAN Report No K-TRAN: KSU-20-03, Kansas Department of Transportation, Draft Final Research Report, Apr. 2022.
  30. Al Shboul, K. W., and Rasheed, H. A. “Non-Cantilever Fatigue Remaining-Life Simulation Software Using Probabilistic Wind Model for All Counties in Kansas,” Ad Hoc Research Report No: RE-2021-01, Kansas Department of Transportation, Draft Final Research Report, July. 2022.
  31. Zaki, M. A. and Rasheed, H. A. “Strengthening Sand Lightweight Concrete with CFRP Sheets and U-Wrap Anchors,” Draft Final Research Report AUD-KSU-22-1, Structural Technologies Inc., Mar. 2022.
  32. Zaki, M. A. and Rasheed, H. A. “Strengthening Sand Lightweight Concrete with CFRP Sheets and Splay Anchors,” Draft Final Research Report AUD-KSU-22-2, Structural Technologies Inc., Oct. 2022.
  33. Salahat, F. H., Jones, C., A., and Rasheed, H. A. “Computationally Informed Methodologies for Capturing the Effect of Intervening Structures During Truck Impact Events: Phase II,” KTRAN Report No K-TRAN: KSU-21-07, Kansas Department of Transportation, Draft Final Research Report, May 2023.